Cute Handmade 3D Decoupage Cards - 15 - Hugging Bears

Blue card for a newborn baby boy and a pink one for a newborn baby girl.

To make this card you will need:

• Forever Friends "Hugs & Cuddles" paper pack (6 x 6 in) - I purchased mine in Hobbycraft but they do not seem to stock it anymore - if you like, you can purchase it through my blog's link
• White card paper (15 x 30cm)
• Rich pink card paper (15 x 15cm)
• Purple card paper (10 x 10cm)
• Pale yellow card paper (9 x 9cm)
• Message outline sticker "Congratulations"
• Double sided tape
• Craft foam pads (I used Stix 2mm thick - it makes the 3D effect more noticeable - but you can use thinner craft foam pads if you prefer)

Find the picture of the 2 bears with the pink-checks background. You will need 3 of those. 

 

Cut out parts of the 3 pictures as shown in the picture bellow.

 

From the 1st picture card cut out an outline of the hugging bears. From the 2nd picture cut out an outline of the big bear holding a small bear (without little bear's legs, right ear and right hand and without big bear's left ear and part of left leg) as shown in the picture above. From the 3rd picture card cut out an outline of the big bear's right foot, right hand and head as well as the little bear's left hand as shown on the picture above.

Take white card 15cm x 30cm and fold it in half. Take a pink card paper (size 15cm x 15cm) and using double sided tape attach it to the white card. Take a pale yellow card (9 x 9 cm) and attach it to the purple card (10 x 10 cm) using double sided tape. Attach the pale yellow-purple card paper to the middle of the pink card using foam pads.

Now it's time to use the cut out parts of the bears. Take the cut out outline of the hugging bears from the 1st picture card and attach it to the pale yellow card using double sided tape. Then take the cut outs from the 2nd picture card and attach them to the card over the picture of the bears using foam pads. And then take the cut outs from the 3rd picture card and again attach them to the picture on the card using foam pads, creating layers.

Attach a message outline sticker to the card.

Cute Handmade 3D Decoupage Cards - 13 - Hugging Bears

And another card designed using the "Forever Friends - Hugs and Cuddles" paper pack. Congratulations on new baby girl arrival - card in pink.

To make this card you will need:

• Forever Friends "Hugs & Cuddles" paper pack (6 x 6 in) - I purchased mine in Hobbycraft but they do not seem to stock it anymore - if you like, you can purchase it through my blog's link
• White card paper (15 x 30cm)
• Message outline sticker "Congratulations"
• Double sided tape
• Craft foam pads (I used Stix 2mm thick - it makes the 3D effect more noticeable - but you can use thinner craft foam pads if you prefer)

Find the picture of the 2 bears with the pink-checks background. You will need 3 of those. 

 

Cut out parts of the 2 pictures (keep the 3rd one on side for now) as shown in the picture bellow.

 

From the first picture cut out an outline of the big bear holding a small bear (without little bear's legs, right ear and right hand and without big bear's left ear and part of left leg) as shown in the picture above. From the second picture card cut out an outline of the big bear's right foot, right hand and head as well as the little bear's left hand as shown on the picture above.This bit is quite fiddly and it does take some time to cut it all out (I used nail scissors) but the rest is very quick and easy.

Take white card 15cm x 30cm and fold it in half. Take a picture card paper with the bears and the pink-checks background and using double sided tape attach it to the white card. Cut off the part of the picture card that overlaps the white card.

Now it's time to use the cut out parts of the bears. Take the cut outs from the first picture card and attach them to the card over the original picture using foam pads. Then take the cut outs from the 2nd picture card and again attach them to the picture on the card using foam pads, creating layers.

Attach a message outline sticker to the card.

 

Cute Handmade 3D Decoupage Cards - 8 - Bathtime Teddybear

And another card designed using the "Forever Friends - Hugs and Cuddles" paper pack. New baby girl!!! Congratulations!

To make this card you will need:

• Forever Friends "Hugs & Cuddles" paper pack (6 x 6 in) - I purchased mine in Hobbycraft but they do not seem to stock it anymore - if you like, you can purchase it through my blog's link
• White card paper (15 x 30cm)
•  Pink-check card paper (15 x 15cm) - from the Forever Friends "Hugs & Cuddles" paper pack
• Raspberry pink card paper (10 x 10cm)
•  Pale yellow card paper (9 x 9cm)
• Message outline sticker "Congratulations"
• Double sided tape
• Craft foam pads (I used Stix 2mm thick - it makes the 3D effect more noticeable - but you can use thinner craft foam pads if you prefer)

Find the picture of the bear wrapped in a bath towel. You will need 3 of those. 

 

Cut out parts of the 3 pictures as shown in the picture bellow.

From the first picture cut out an outline of the whole bear wrapped in the towel. From the second picture card cut out an outline of the bear's left leg, then cheeks-mouth-nose with the towel and right hand and right leg as shown in the picture above. From the third card cut out bears left leg and right leg with a piece of the towel as shown on the picture above. Also cut out few of the bubbles. This bit is quite fiddly and it does take some time to cut it all out (I used nail scissors) but the rest is very quick and easy.

Take white card 15cm x 30cm and fold it in half. Take a pink-checks card paper (size 15cm x 15cm) and using double sided tape attach it to the white card. Take a pale yellow card (9 x 9 cm) and attach it to the raspberry pink card (10 x 10 cm) using double sided tape. Attach the pale yellow-raspberry pink card paper to the middle of the pink-checks card using foam pads.

Now it's time to use the cut out parts of the bear and the bubbles. Take the cut outs from the first picture card (whole bear wrapped in the towel) and attach them to the pale yellow card using double sided tape. Take the cut outs from the second picture card and attach them to the card over the original picture using foam pads. Then take the cut outs from the 3rd picture card and again attach them to the picture on the card using foam pads, creating layers. Also attach bubbles using foam pads (see picture of the finished card).

Attach a message outline sticker to the card.

Cute Handmade 3D Decoupage Cards - 6 - Cuddly Rabbit

Yesterday I showed you a handmade card to be given to happy parents of a new born baby boy. Of course I made a card for a baby girl too. And it's just as cute and easy, but pink.

To make this card you will need:

• Forever Friends "Hugs & Cuddles" paper pack (6 x 6 in) - I purchased mine in Hobbycraft but they do not stock it anymore - if you like, you can purchase it through my blog's link
• White card paper (15 x 30cm)
•  Pink-checks card paper (15 x 15cm) - from the "Hugs & Cuddles" paper pack
•  Pale yellow card paper (9 x 9cm) 
• Lilac card paper (10 x 10 cm)
• Message outline sticker "Congratulations"
• 4 Adhesive gems -pink
• Double sided tape
• Craft foam pads (I used Stix 2mm thick - it makes the 3D effect more noticeable - but you can use thinner craft foam pads if you prefer)

Find the picture of the rabbit. You will need 3 of those. 

 

Cut out parts of the 3 pictures as shown in the picture bellow.

From the first picture cut out the whole outline of the rabbit and the tag with the bow. From the second picture cut out an outline of the rabbit's legs, hands and head with the ears as shown in the picture above. From the third card cut out rabbit's ears, nose and mouth and feet and a heart from the tag as shown on the top right corner of the picture above. This bit is quite fiddly and it does take some time to cut it all out (I used nail scissors) but the rest is very quick and easy.

Take white card 15cm x 30cm and fold it in half. Take a pink-checks card paper (size 15cm x 15cm) and using double sided tape attach it to the white card. Take a pale yellow card (9 x 9 cm) and attach it to the lilac card (10 x 10 cm) using double sided tape. Attach the pale yellow-lilac card paper to the middle of the pink-checks card using foam pads.

Now it's time to use the cut out parts of the rabbit and the tag. Take the cut outs from the first picture card and attach them to the pale yellow card (Attach the outline of the rabbit to the card using double sided tape and the tag using foam pads). Take the cut outs from the second picture card and attach them to the card over the pictures using foam pads. Then take the cut outs from the 3rd picture card and again attach them to the picture on the card using foam pads, creating layers.

Attach a pink gem to the heart and 3 pink gems to the top right of the card. Add a message outline sticker.

Cute Handmade 3D Decoupage Cards - 4 - Cuddly Rabbit

This is another card designed using the "Forever Friends" paper packs. It's celebrating arrival of a new baby girl.

To make this card you will need:

• Forever Friends "Hugs & Cuddles" paper pack (6 x 6 in) - I purchased mine in Hobbycraft, however if you like you can purchase it through Amazon (direct link is on my blog)
• White card paper (15 x 30cm)
• Message outline sticker "Congratulations"
• Adhesive gem - pink 
• Double sided tape
• Craft foam pads (I used Stix 2mm thick - it makes the 3D effect more noticeable - but you can use thinner craft foam pads if you prefer)

Find the picture of the rabbit. You will need 3 of those. 

 

Cut out parts of the 2 pictures (keep the 3rd one on side for now) as shown in the picture bellow.

From the first picture cut out an outline of the rabbit's legs, hands and head with the ears, 5 buttons and the bow with the tag as shown in the picture above. From the second card cut out rabbit's ears, nose and mouth and feet and a heart from the tag as shown on the top right corner of the picture above. This bit is quite fiddly and it does take some time to cut it all out (I used nail scissors) but the rest is very quick and easy.

Take white card 15cm x 30cm and fold it in half. Take a whole picture card of the rabbit and using double sided tape attach it to the white card. Cut off the part of the picture card that overlaps the white card.

Now it's time to use the cut out parts of the rabbit, buttons and tag. Take the cut outs from the first picture card and attach them to the card over the original pictures using foam pads. Then take the cut outs from the 2nd picture card and again attach them to the picture on the card using foam pads, creating layers.

Attach a gem to the heart and add a message outline sticker.