Cute Handmade 3D Decoupage Cards - 23 - Sleeping Bear

And another card designed using the "Forever Friends - Hugs and Cuddles" paper pack. Congratulations on newborn baby girl.

To make this card you will need:

• Forever Friends "Hugs & Cuddles" paper pack (6 x 6 in) - I purchased mine in Hobbycraft but they do not seem to stock it anymore - if you like, you can purchase it through my blog's link
• White card paper (15 x 30cm)
• Message outline sticker "Congratulations"
• Double sided tape
• Craft foam pads (I used Stix 2mm thick - it makes the 3D effect more noticeable - but you can use thinner craft foam pads if you prefer)

Find the picture of the sleeping bear with the pink-stripes background. You will need 3 of those. 

 

Cut out parts of the 2 pictures (keep the 3rd one on side for now) as shown in the picture bellow.

From the first picture cut out an outline of the sleeping bear (without the left ear), duvet and part of the pillow as shown in the picture above. From the second picture card cut out part of the pillow, rabbit, bear's nose and bears left hand as shown in the picture above.

Take white card 15cm x 30cm and fold it in half. Take a picture card paper with the sleeping bear and the pink-stripes background and using double sided tape attach it to the white card. Cut off the part of the picture card that overlaps the white card.

Now it's time to use the cut out parts of the bears. Take the cut outs from the first picture card and attach them to the card over the original picture using foam pads. Then take the cut outs from the 2nd picture card and again attach them to the picture on the card using foam pads, creating layers.

Attach a message outline sticker to the card.

 

 

Cute Handmade 3D Decoupage Cards - 22 - Rolling Bear

 

To make this card you will need:

• Forever Friends "Hugs & Cuddles" paper pack (6 x 6 in) - I purchased mine in Hobbycraft but they do not seem to stock it anymore - if you like, you can purchase it through my blog's link
• White card paper (15 x 30cm)
•  Sage green card paper (15 x 15cm)
• Yellow (or red) card paper (10 x 10cm)
• Cream card paper (9 x 9cm)
• Message outline sticker "Congratulations"
• Double sided tape
• Craft foam pads (I used Stix 2mm thick - it makes the 3D effect more noticeable - but you can use thinner craft foam pads if you prefer)

Find the picture of the crawling and rolling bears with the green-checks background. You will need 3 of those. 

 

Cut out parts of the 3 pictures as shown in the picture bellow.

Crawling bear picture - cut out following 2x:

From the first picture cut out outline of the 2 crawling bears. From the second picture cut out an outline of the crawling bear but not his leg as shown in the picture above (2x). From the third picture card cut out an outline of the bear's head (without ears), right and left hand (2x). 

Rolling bear picture - cut out following:

From the 1st picture cut out outline of the rolling bear. From the second picture cut out an outline of the rolling bear but not his left hand and ears as shown in the picture above. From the 3rd picture card cut out bear's feet and right hand.

Take white card 15cm x 30cm and fold it in half. Take a green card paper (size 15cm x 15cm) and using double sided tape attach it to the white card. Take a cream card (9 x 9 cm) and attach it to the yellow (or red) card paper (10 x 10 cm) using double sided tape. Attach the cream-yellow (or cream-red) card paper to the green card using foam pads.

Now it's time to use the cut out parts of the bears. Take cut outs from the 1st picture card and attach it to the cream card using double sided tape. Then take the cut outs from the 2nd picture card and attach them to the card over the original pictures using foam pads. Then take the cut outs from the 3rd picture card and again attach them to the picture on the card using foam pads, creating layers.

Attach a message outline sticker to the card.

 

Cute Handmade 3D Decoupage Cards - 21 - Rolling Bear

This is another card celebrating a newborn baby; designed using "Forever Friends - Hugs and Cuddles" paper pack.

To make this card you will need:

• Forever Friends "Hugs & Cuddles" paper pack (6 x 6 in) - I purchased mine in Hobbycraft but they do not seem to stock it anymore - if you like, you can purchase it through my blog's link
• White card paper (15 x 30cm)
•  Rich pink (for girl) or pastel blue (for boy) card paper (15 x 15cm)
•  Navy blue (for girl) or medium dark blue (for boy) card paper (10 x 10cm)
• Cream card paper (9 x 9cm)
• Message outline sticker "Congratulations"
• Double sided tape
• Craft foam pads (I used Stix 2mm thick - it makes the 3D effect more noticeable - but you can use thinner craft foam pads if you prefer)

Find the picture of the crawling and rolling bears with the green-checks background. You will need 3 of those. 

 

Cut out parts of the 3 pictures as shown in the picture bellow.

Crawling bear picture - cut out following 2x:

From the first picture cut out outline of the 2 crawling bears. From the second picture cut out an outline of the crawling bear but not his leg as shown in the picture above (2x). From the third picture card cut out an outline of the bear's head (without ears), right and left hand (2x). 

Rolling bear picture - cut out following:

From the 1st picture cut out outline of the rolling bear. From the second picture cut out an outline of the rolling bear but not his left hand and ears as shown in the picture above. From the 3rd picture card cut out bear's feet and right hand.

Take white card 15cm x 30cm and fold it in half. Take a rich pink card (for girl) or pastel blue card (for boy) - (size 15cm x 15cm) and using double sided tape attach it to the white card. Take a cream card (9 x 9 cm) and attach it to the navy blue (for girl) or medium dark blue card (for boy) - (10 x 10 cm) using double sided tape. Attach the cream-navy blue card paper to the middle of the pink card (for girl) or cream-medium blue card to the paste blue card (for boy) using foam pads.

Now it's time to use the cut out parts of the bears. Take cut outs from the 1st picture card and attach it to the cream card using double sided tape. Then take the cut outs from the 2nd picture card and attach them to the card over the original pictures using foam pads. Then take the cut outs from the 3rd picture card and again attach them to the picture on the card using foam pads, creating layers.

Attach a message outline sticker to the card.

Cute Handmade 3D Decoupage Cards - 20 - Rolling Bear

This is another card celebrating a newborn baby; designed using "Forever Friends - Hugs and Cuddles" paper pack. 

To make this card you will need:

• Forever Friends "Hugs & Cuddles" paper pack (6 x 6 in) - I purchased mine in Hobbycraft but they do not seem to stock it anymore - if you like, you can purchase it through my blog's link
• White card paper (15 x 30cm)
• Message outline sticker "Congratulations"
• Double sided tape
• Craft foam pads (I used Stix 2mm thick - it makes the 3D effect more noticeable - but you can use thinner craft foam pads if you prefer)

Find the picture of the crawling and rolling bears with the green-checks background. You will need 3 of those. 

 

Cut out parts of the 2 pictures (keep the 3rd one on side for now) as shown in the picture bellow.

Crawling bear picture - cut out following:

As there are 3 crawling bears in the picture, cut following 3 times.

From the first picture cut out an outline of the crawling bear but not his leg as shown in the picture above. From the second picture card cut out an outline of the bear's head (without ears), right and left hand. 

Rolling bear picture - cut out following:

There are 2 rolling bears in the picture, cut following 2 times.

From the first picture cut out an outline of the rolling bear but not his left hand and ears as shown in the picture above. From the second picture card cut out bear's feet and right hand.

Take white card 15cm x 30cm and fold it in half. Take a picture card paper with the bears and the green-checks background and using double sided tape attach it to the white card. Cut off the part of the picture card that overlaps the white card.

Now it's time to use the cut out parts of the bears. Take the cut outs from the first picture card and attach them to the card over the original picture using foam pads. Then take the cut outs from the 2nd picture card and again attach them to the picture on the card using foam pads, creating layers.

Attach a message outline sticker to the card.

Cute Handmade 3D Decoupage Cards - 19 - Peekaboo Bear

To make this card you will need:

• Forever Friends "Party Time" paper pack (6 x 6 in) - I purchased mine in Hobbycraft, however they do not stock it anymore. If you like you can purchase it through my blog
• White card paper (15 x 30cm)
• Pale yellow card paper (15 x 15cm)
• Outline stickers " Happy Birthday" from Anita's Glitterations outline stickers in silver
• 3D Birthday Cake  Anita's Dimensions stickers
• Double sided tape 
• Craft foam pads (I used Stix 2mm thick - it makes the 3D effect more noticeable - but you can use thinner craft foam pads if you prefer)

Anita's Dimensions  Birthday Cakes

Anita's Glitterations Birthday Wishes Outline stickers in silver

Find the picture of a bear with pink background as shown bellow. You will need 3 of those. 

Cut out parts of the 3 pictures as shown in the picture bellow.

From the 1st picture cut out the outline of the bear and the pink stripe with the flowers. From the second picture cut out bear's head (without ears) and both hands as shown on the picture above. From the 3rd picture card cut out bear's hands as shown on the picture above.

Take white card 15cm x 30cm and fold it in half. Take a pale yellow card paper (size 15cm x 15cm) and using double sided tape attach it to the white card. 

Now it's time to use the cut out parts of the bear. Take the cut out picture from the 1st picture card and attach it to the pale yellow card using double sided tape. Take the cut outs from the 2nd picture (bear's head and both hands) and attach it over the picture on the card using foam pads. Then take the cut outs from the 3rd picture card (bear's hands) and again attach them over the picture on the card using foam pads, creating layers.

Attach the 3D birthday cake sticker to the card. Then attach a message outline sticker to the card.