I made 2 Halloween bags and decorated them with a different Halloween picture on each side. You can decide on just one picture for each bag if you like.
In my previous post I described how to make the basic bag. This post is about how to make the Halloween pictures for the bags.
To make 1st Halloween Ghost picture you will need:
- Indigo blue card paper (15 x 15cm)
- Black card paper (approx. 15 x 15cm)
- White card paper with slightly greyish tone for the ghost (approx. 8 x 8 cm)
- 8 green adhesive gems (I used gems 2mm thick)
- Mango yellow card paper for the full moon (approx. 10 x 10 cm)
- Double sided tape
- Craft foam pads (I used Stix 2mm thick)
I have set
up and online shop - CRAFT MAGIC ONLINE SHOP- on my blog (top right
corner). You can now purchase many crafting supplies right here. The
shop is powered by Amazon, so you would be making the purchase through
Amazon. I have just selected (and sorted into various categories)
crafting products that Amazon sells. My blog's shop is divided into 2
parts; one offers paper crafting and scrapbooking supplies and the other
one is for crafty kids and offers variety of beautiful crafty kits and
products designed for children.
Instructions:
Take black card and cut out the castle ruin (15 cm width and 7.5 cm height) and 3 bats (1 bigger bat 6.5 cm width and 2.5 cm height, 2 smaller bats 5.5 cm width and 2 cm height). Take the white card with gray tone and cut out the ghost (6 x 6 cm). Then take the mango yellow card paper and cut out a circle (7.5 cm diameter) - the full moon.
Attach the full moon to the blue card (15 x 15 cm) using double sided tape. Then attach the castle ruin and the 3 bats, using foam pads, to the blue card (and over the full moon). Finally attach the ghost to the castle ruin, using foam pads. It's not very noticeable on the picture but when attaching bats to the card using foam pads, I layered it a bit by using 2 foam pads on top of each other. I attached one wing of the bat to the paper using 2 foam pads and the other wing I attached to the paper using double sided tape. This makes the bat looking as if it is flying at an angle.
Add green gems as eyes to the ghost and to the flying bats. Attach the Halloween picture to the orange bag. You can attach it either using double sided tape. However, if you prefer, you can use foam pads instead. The advantage is that after the bag is used, you can remove the Halloween pictures from the bag and use it next year to make a card or attach a string onto it and use it as Halloween decorations for next year.
Note: detailed instructions on how to draw the ghost, bats and castle ruin you can find in my previous postings. There is some small alteration to the castle ruin. See pictures bellow. This show how to get the basic shape, then cut uneven edge as described in How to Make Castle Crenelations posting.
To make 2nd Halloween Ghost picture you will need:
Instructions:
Attach the full moon to the blue card (15 x 15 cm) using double sided tape. Then attach the castle ruin and the 3 bats, using foam pads, to the blue card (and over the full moon). Finally attach the ghost above the castle ruin, using foam pads. It's not very noticeable on the picture but when attaching bats to the card using foam pads, I layered it a bit by using 2 foam pads on top of each other. I attached one wing of the bat to the paper using 2 foam pads and the other wing I attached to the paper using double sided tape. This makes the bat looking as if it is flying at an angle.
Add green gems as eyes to the ghost and to the flying bats. Attach the Halloween picture to the orange bag. You can attach it either using double sided tape. However, if you prefer, you can use foam pads instead. The advantage is that after the bag is used, you can remove the Halloween pictures from the bag and use it next year to make a card or attach a string onto it and use it as Halloween decorations for next year.
Note: detailed instructions on how to draw the ghost, bats and castle ruin you can find in my previous postings. There is some small alteration to the castle ruin. See pictures bellow. This show how to get the basic shape, then cut uneven edge as described in How to Make Castle Crenelations posting.
To make Halloween Spider picture you will need:
Instructions:
Take an orange card paper (size 15cm x 15cm), hand stitch a spider web onto it using a black stranded cotton (or use black sewing thread). Take a black card paper (15 x 15 cm) and measure 2.5 cm from each side, then cut out the inside square.
Make uneven cuts on the inside of the frame as in the picture bellow.
Instructions:
Take black card and cut out the castle ruin (15 cm width and 7.5 cm height) and 3 bats (1 bigger bat 6.5 cm width and 2.5 cm height, 2 smaller bats 5.5 cm width and 2 cm height). Take the white card with gray tone and cut out the ghost (6 x 6 cm). Then take the mango yellow card paper and cut out a circle (7.5 cm diameter) - the full moon.
Attach the full moon to the blue card (15 x 15 cm) using double sided tape. Then attach the castle ruin and the 3 bats, using foam pads, to the blue card (and over the full moon). Finally attach the ghost to the castle ruin, using foam pads. It's not very noticeable on the picture but when attaching bats to the card using foam pads, I layered it a bit by using 2 foam pads on top of each other. I attached one wing of the bat to the paper using 2 foam pads and the other wing I attached to the paper using double sided tape. This makes the bat looking as if it is flying at an angle.
Add green gems as eyes to the ghost and to the flying bats. Attach the Halloween picture to the orange bag. You can attach it either using double sided tape. However, if you prefer, you can use foam pads instead. The advantage is that after the bag is used, you can remove the Halloween pictures from the bag and use it next year to make a card or attach a string onto it and use it as Halloween decorations for next year.
Note: detailed instructions on how to draw the ghost, bats and castle ruin you can find in my previous postings. There is some small alteration to the castle ruin. See pictures bellow. This show how to get the basic shape, then cut uneven edge as described in How to Make Castle Crenelations posting.
To make 2nd Halloween Ghost picture you will need:
- Indigo blue card paper (15 x 15cm)
- Black card paper (approx. 15 x 15cm)
- White card paper with slightly greyish tone for the ghost (approx. 8 x 8 cm)
- 6 green adhesive gems (I used gems 2mm thick)
- Mango yellow card paper for the full moon (approx. 10 x 10 cm)
- Double sided tape
- Craft foam pads (I used Stix 2mm thick)
Instructions:
Attach the full moon to the blue card (15 x 15 cm) using double sided tape. Then attach the castle ruin and the 3 bats, using foam pads, to the blue card (and over the full moon). Finally attach the ghost above the castle ruin, using foam pads. It's not very noticeable on the picture but when attaching bats to the card using foam pads, I layered it a bit by using 2 foam pads on top of each other. I attached one wing of the bat to the paper using 2 foam pads and the other wing I attached to the paper using double sided tape. This makes the bat looking as if it is flying at an angle.
Add green gems as eyes to the ghost and to the flying bats. Attach the Halloween picture to the orange bag. You can attach it either using double sided tape. However, if you prefer, you can use foam pads instead. The advantage is that after the bag is used, you can remove the Halloween pictures from the bag and use it next year to make a card or attach a string onto it and use it as Halloween decorations for next year.
Note: detailed instructions on how to draw the ghost, bats and castle ruin you can find in my previous postings. There is some small alteration to the castle ruin. See pictures bellow. This show how to get the basic shape, then cut uneven edge as described in How to Make Castle Crenelations posting.
To make Halloween Spider picture you will need:
- Black card paper approx. 10 x 10 cm
- Orange card paper (15 x 15cm)
- Black card paper (15 x 15cm)
- 2 wiggle eyes
- Black stranded cotton thread and needle (or an ordinary black sewing thread)
- Double sided tape
- Craft foam pads (I used Stix 2mm thick)
Instructions:
Take an orange card paper (size 15cm x 15cm), hand stitch a spider web onto it using a black stranded cotton (or use black sewing thread). Take a black card paper (15 x 15 cm) and measure 2.5 cm from each side, then cut out the inside square.
Make uneven cuts on the inside of the frame as in the picture bellow.
Then cut in random triangles as show in the picture below. You will have a border for your spider picture.
Attach the black border to the orange card with the spider web you made earlier (using double sided tape). Cut out a black spider (size about 9 x 5 cm) and attach it to the orange card with the web using foam pads. Attach 2 wiggle eyes to the spider.
You can find detailed instructions on how to make the spider web and the spider in my previous Halloween blog postings.
To make Halloween Pumpkin picture you will
need:
Instructions:
Take the peach card paper, draw the pumpkin on it (size 13 cm width x 10 cm height + 2 cm long stalk) and cut it out including the holes for the eyes, nose and toothy smile. Use a craft knife to cut out the holes in the pumpkin, however if you do not have it, you can use nail scissors for the fiddly bits instead. Draw black lines on the pumpkin using black gel pen (follow the picture as a guidance). Take black card paper (14.5 x 14.5 cm), cut its edges to create an uneven cut border (as shown in the Halloween Spider card in previous posting). Attach the finished pumpkin to the black card using foam pads. Remember to add 2 green adhesive gems as eyes.
See further bellow a reminder on how to make an uneven cut border.
And at last,
Finishing touches to the bag:
Create an uneven cut border to put on top of the bag. You will need 2 pieces of 21cm x 2.5 cm black card paper for each bag.
Keeping your bag folded, make 4 holes through the top border as shown in the pictures bellow.
And finally, fill the bag(s) up with sweets and treats, and string a black ribbon through the holes. Make a bow. As an additional touch you can cut up the ends of the black bow.
Attach the black border to the orange card with the spider web you made earlier (using double sided tape). Cut out a black spider (size about 9 x 5 cm) and attach it to the orange card with the web using foam pads. Attach 2 wiggle eyes to the spider.
You can find detailed instructions on how to make the spider web and the spider in my previous Halloween blog postings.
- Peach card paper (15 x 15cm)
- 2 green adhesive gems (I used gems 2mm thick)
- Black card paper (14.5 x 14.5 cm)
- Double sided tape
- Black gel pen
- Craft foam pads (I used Stix 2mm thick)
Instructions:
Take the peach card paper, draw the pumpkin on it (size 13 cm width x 10 cm height + 2 cm long stalk) and cut it out including the holes for the eyes, nose and toothy smile. Use a craft knife to cut out the holes in the pumpkin, however if you do not have it, you can use nail scissors for the fiddly bits instead. Draw black lines on the pumpkin using black gel pen (follow the picture as a guidance). Take black card paper (14.5 x 14.5 cm), cut its edges to create an uneven cut border (as shown in the Halloween Spider card in previous posting). Attach the finished pumpkin to the black card using foam pads. Remember to add 2 green adhesive gems as eyes.
See further bellow a reminder on how to make an uneven cut border.
And at last,
Finishing touches to the bag:
A B C |
Cut 2 x stripes of
paper - size 21 x 2.5 cm each - from a black card paper. Cut irregular
wavy shape into one side of both stripes (A). Then cut in randomly
irregular triangle shapes (B). And the border for the bag is done (C).
See picture above.
Attach the black uneven cut border to the bag using double sided tapes.
Keeping your bag folded, make 4 holes through the top border as shown in the pictures bellow.
And finally, fill the bag(s) up with sweets and treats, and string a black ribbon through the holes. Make a bow. As an additional touch you can cut up the ends of the black bow.